November 20, 2026

Funny Moments that happened today, November 20, 2026

The 0.545 km Coincidence: When Two Fiber Optic Teams Worked on the Same Line

The 0.545 km Coincidence: When Two Fiber Optic Teams Worked on the Same Line

Splicing Image

Today, November 20, 2026, at 8:00 AM WIB (Western Indonesian Time), we started our day as usual with a morning briefing. We prayed together, checked our equipment, and divided up the tasks. Out of five technicians, we split into two teams: two handled the backbone for a high-attenuation line, while my two teammates and I went out to fix a line loss, a severed cable, on the client side.

Finding the Break

Once we arrived at the site, our first step was of course to measure the line using an OTDR (Optical Time-Domain Reflectometer, a testing device used to locate breaks or faults along a fiber optic cable). The reading showed a fault at 0.545 km (about 0.339 miles). For the time being, we just noted that number down.

We started working from the initial point at 0.00 km at the ODP (Optical Distribution Point, the terminal box that distributes fiber optic cables directly to clients’ homes) to make sure the starting connector was in top shape through splicing. Oddly enough, right after splicing, the attenuation immediately read at -18 dBm (decibel-milliwatts, a unit used to measure optical signal power), even though it had previously been a total loss at around -50 dBm. We were puzzled as to why a severed line had suddenly connected normally, so we began checking the connection.

The Sudden Drop

However, just a few minutes later, the signal dropped again and the attenuation went right back to -50 dBm. As the one who did the splicing, I immediately suspected my splice had failed. I carefully redid the splice, checked the reading, and… yep, still -50 dBm.

Our confusion only grew since a line that had just read normal was suddenly showing a loss again.

The Plot Twist at 0.545 km

Finally, we contacted the office and checked in with the other technician team. And here’s the funny part: that 0.545 km mark from the 0.000 km point (ODP) turned out to lead straight to the ODC (Optical Distribution Cabinet, a larger distribution box that connects the main backbone cable to multiple ODPs) that the backbone team was actively repairing.

We had no idea the ODC was being worked on, and the team at the ODC had no idea we were working on the ODP line.

Once we confirmed everything with each other, it all made total sense, and we were able to wrap up the job and get everything running normally again.